Highly effective in preventing mildew and stains
Product features
The two-component real porcelain glue adopts imported technology and uses the mixing method of static mixing glue nozzle. After the extrusion force of the glue gun, the AB glue is fully mixed and reacted and then solidified. After solidification, it has the following characteristics:
①All-in-one, waterproof, mildew-proof, anti-black, anti-fouling, acid and alkali resistant, aging resistant, oil resistant, and hard as porcelain.
②The color is bright, integrating fashion elements, highlighting the elegant, beautiful and rich temperament, showing a subtle silky feel, and unique charm.
③Convenient construction, glue gun construction, can be filled without collapse, no shrinkage, one-time molding, easy and fast. Suitable for family DIY operation, saving cost.
④It is used for wall construction without flow, ensuring the imagination space and aesthetic expression ability of product design.
⑤High hardness, shrinkage matches with tiles, no cracking, solving the problem of low hardness of single-component caulking agent, concave shrinkage and easy cracking. It also extends the use time and has a once-and-for-all effect.
The main purpose
Filling, waterproofing, and mildew-proofing of various ceramic tiles, glass tiles, quartz tiles, ceramic tiles, mosaics, etc. Seams, floors, and walls in kitchen countertops, shower rooms, toilets, window sills, countertops, etc.
Construction summary:
① Clean the grooves and make sure there is no water or dust in the gaps to avoid uneven surface and easy peeling after construction.
② Stick masking paper or adhesive tape on the edge of the grooves before applying glue.
③ Use a labor-saving glue gun for construction. First, apply about 60cm of glue and discard it to ensure that the glue is evenly mixed.
④ Apply glue along the gap. The diameter of the glue outlet should be smaller than the width of the gap. After applying the glue, use a round stick to scrape and straighten the glue strip. Tear off the masking paper or adhesive tape before the glue dries.
⑤ If there is any glue overflow, wipe it with alcohol or scrape it off with a spatula after the glue is cured.
The surface will cure after standing for 3-5 hours, basically cure within 24 hours, and completely cure within 72 hours.
Precautions
During the construction process, if the glue is not applied continuously for more than 20 minutes, the glue in the mixing tube will gradually solidify. If it is difficult to apply glue or it cannot be applied, a new mixing tube needs to be replaced. For the glue that has not been used up in the hose, first unscrew the mixing tube, wipe off the glue overflowing from the hose head, and then tighten it with the glue cap to store it. When it is needed next time, replace it with a new glued hose and continue to use it. Our company’s products are guaranteed to be of qualified quality at the factory, but users must decide the applicability of the products by themselves. Our company is not responsible for the losses caused by quality problems caused by improper construction or external factors.